Master Clocks
the MPU model line, the standard model controls 2
secondary clock lines with minute, half-minute or second pulses and 4
relay outputs. A day, week and year programmer as well as a public
holiday calendar have been programmed into this range of products. The
MPU can be adapted to satisfy the specific requirements by additional
modules.
Digital Clocks
The Schauer digital clocks offer a wide range of different
options and combination possibilities. The digital clocks can display
time, date, weekday, month and temperature. They may also have one or
two faces thereby offering the desired solution for every purpose: from
the time display in the multilingual calendar clock to the world time
display that has 5 or more time zones.
Model Range: BT Series
has a flat black plastic case and red or green digits that are 5 or 7 cm
in height. (Figure colours of blue or orange are also available with
certain models). These models are installed as secondary clocks within a
clock system or as individual clocks (partly synchronised by DCF) and
have an automatic illumination control. The data display is available in
various languages.
BT-LCD Series
round off the program of Schauer's digital clocks. They dispose of an
extra flat plastic casing in a shapely design and are in the case
colours aluminium, white, bordeaux or champagne available. The liquid
crystal display with 70 mm high figures can be read off from an angle of
up to 120°. Clocks, which are showing the date, can be adjusted for 18
different languages. All types are as stand-alone quartz battery clocks,
stand-alone battery clocks with integrated DCF antenna or as slave
clocks available.
Model Range: 400 Series
clocks in this range may have one or two faces, the standard case is
made from aluminium and is available in anodised silver, bronze or black
and has manual or automatic illumination control. Options include flush
mounting cases, as well as your choice of IP 65 cases (upon request).
The digits, depending on the model, may be 20, 50, 57, 120 or 200 mm in
height and red, green or blue in colour. The date display option may be
set in various languages. In a secondary clock synchronisation is
ensured by means of a serial time signal or a polarised impulse. In the
case of stand-alone operation synchronisation maybe carried out by
either DCF or GPS.
World Time Display: 400 Series
clocks in this series may have black or silver-anodised aluminium cases.
They come in three versions, one-sided clocks that are fitted for
mounting on walls, double-sided clocks that are fitted with ceiling
brackets and a flush mounting version. The dot matrix or 7-segment
display can be provided with red or green LED`s with digit sizes of 25,
50, 57, 100 or 120 mm.
Three to eight time zones may be displayed horizontally or vertically
allowing for the inscription of the names of specific cities. The date
display option can be set for various languages.
HM Series
The HM series of time-temperature displays suitable for indoor and
outdoor usage have an aluminium case, an electro-mechanical 7-segment
display that may be white or yellow in colour.
The time-temperature display is also available with red LED display.
These displays with digit sizes of 14, 19, 25, 28 or 45cm, are available
as one-sided clocks that are fitted for mounting on walls or
double-sided clocks that are fitted with ceiling brackets. A temperature
display (air or water) can be added to this model, which is synchronised
by DCF, GPS or minute impulses from a master clock.
Analogue Clocks
Analogue clocks represent another important component of the standard
range. These clocks have flat elegant cases, slender conical hands and
are equipped with protective glass; they are suitable for both indoor
and outdoor usage. Analogue clocks are equipped with secondary,
synchronous, quartz battery or DCF movements. Each clock may be
delivered with hour, minute or second hands, and has one or two faces.
The one-sided clocks being fitted for mounting on walls while the
double-sided clocks are fitted with ceiling brackets or wall brackets.
Our range also includes special designs such as watertight and explosion
proof clocks.
"N" - Model Range
The 'N' model range suitable for indoor usage has a plastic clock face
with hour marks or figures, a white plastic case and a flat protective
glass. The 'N' model may be obtained in 23, 30 or 40 cm diameter sizes.
"W" - Model Range - Outdoor
The 'W' model range is suitable for usage outdoor or in damp rooms.
This model has a clock face with hour marks or figures, a grey aluminium
case with a back panel and a domed protective glass. Models are
available in 40, 60, 80 und 90 cm diameter sizes, upon request
illuminated versions are available.
"W" - Model Range - Indoor
The 'W' model range suitable for indoor usage has an aluminium clock
face with hour marks or figures, a grey plastic or aluminium case as
well as a domed protective glass. Models are available in 23, 30, 40,
60, 80 and 90 cm diameter sizes.
"V" - Model Range
The 'V' model range suitable for indoor or outdoor usage has an
aluminium clock face with hour marks or figures and a flat protective
glass. This model has side lengths of 23, 30, 40, 60, 80 and 90 cm.
Illuminated versions are available for models with side lengths of 40 cm
upwards.
|
